ProductDescription
P-235 Injecti-Port I Nozzle
The Injecti-Port I (P-235) fits a 1/2” diameter hole.
[Product Details...]
P-375 Injecti-Port II Nozzle
The Injecti-Port II adapter is bonded to a clean and sound concrete surface over the crack. It consists of a rigid stem rising from a perforated base. The same adhesive used to seal the crack is generally used to secure the adapter.
[Product Details...]
P-380 Nestler Nozzle
The Nestler is a variation of the Injecti-Port II. It ports cracks and joints at interior corners between abutting elements such as walls and floors, or steel plates and concrete.
[Product Details...]
M-260 Setting Tool
The M-260 Setting Tool is used to hold the pedestal while applying the adhesive.
[Product Details...]
P-317 Setting Tool
The P-317 Setting Tool makes driving the P-235 Porting Adapter into the pre-drilled hole a breeze.
[Product Details...]
P-134 Nylon Tubing
The high burst strength (1,000 psi at 72 F.), 7/8' bend radius, resistance to nearly all solvents and chemicals, and Connect-it compatibility make this translucent tubing perfect for injection resin dispensing. It is available by the foot or in 250' reels
[Product Details...]
P-226 Cap-It
Cap-Its (P-226) are used to seal off a port to prevent the injected resin from draining before it has cured.
[Product Details...]
P-228 Connect-It
The Connect-It is a reusable connector that fits all of the Lily porting adapters and the resin supply tubing. It brings all of the Lily Connections together.
[Product Details...]
P-233 Shut-Off Valve
This P-233 Shut-Off Valve controls the flow of resin at each of the ports.
[Product Details...]
P-316 Crimp-It
Crimp-Its are used to seal off a port to prevent the injected resin from draining before it has cured.
[Product Details...]
A-270 Manifold
The A-270 manifold manages the plumbing for the injection of numerous ports simultaneously.
[Product Details...]
A-280 Manifold
The A-280 Manifold manages the plumbing for the injection of numerous ports simultaneously.
[Product Details...]
P-237 Jiffy Mixing Paddle
For thorough mixing of the seal epoxy, use the Jiffy Mixer. The Jiffy is stainless steel, welded, and recommended by resin manufacturers.
[Product Details...]
P-754 Jiffy Mixing Paddle
For thorough mixing of the seal epoxy, use the P-274 Jiffy Mixer.
[Product Details...]
A-933 Hydro Swivel Assy
Lily Hydro-Vac Drilling Assemblies eliminate the impaction of drilling debris by evacuating the debris as it is generated.
[Product Details...]
M-407 Hydro/Vac Adapter
The Hydro/Vac Adapter (M-407) adapts the P-400 Hollow Bit to any SDS Plus drill.
[Product Details...]
P-400 Hydro/Vac Hollow Bit
Sockets must often be drilled to port delaminations or cracks so tightly packed with dirt that they cannot be injected from the surface. If conventional masonry bits are used to drill a porting socket, debris from the process is likely to be impacted into
[Product Details...]
P-405 VAC SWIVEL HEAD
The Vac Swivel Head (P-405) is placed on the Hydro/Vac Adapter (M-407).
[Product Details...]
P-410 VAC CLEANER CONNECTION
The P-410 Vac Cleaner Connection makes the transition from the Vac Tubing(P-412) or (P-788) to a 2" diameter wet/dry vacuum.
[Product Details...]