ProductDescription
HT15 Hand Truck
The Mule Hand Truck (HT-15) is Lily-Built to get the CD15 system around in the tough construction environments where it must perform. Twenty inch solid rubber tires keep everything right side up on job site terrain.
[Product Details...]
TTA-5 Pressure Vessel AssemblyPressure Vessel Assemblies (TTA) are recommended for the transfer of low viscosity resins if the flow requirement is not great: typically injection projects. The vessels are relatively inexpensive, portable, and protect the material from contamination
>[Product Details...]
TTA Twin Tank AssemblyThe Twin Tank Assembly (TTA) consists of two one gallon wide mouth pressure vessels secured to a common rack. The Assembly is ideal when mobility is important. The TTA Assembly and the five gallon vessels are easily interchanged. The performance capabilit
[Product Details...]
A-118-2 Gusto Purge TankBecause the resin components do not merge until they are within the mixer, cleanup is limited to the mixer and downstream tubing and port valves. With Gusto, it is easy.
[Product Details...]
A-955 Tempest MixerLily Corporation offers a variety of mixers to manage the various viscosities, rates of flow, mixing characteristics, and pressures. Our Tempest (A-955) mixer was especially designed by Lily to mix super low viscosity resins used for crack injection.
[Product Details...]
LC-650
The reading on the pressure gauge of a CD dispenser is not the resin pressure. Rather, it is the air pressure delivered to the main air cylinder. Although a table in the Service and Operations Manual charts the ratio of the air pressure to the resin press
[Product Details...]